Mold & Duct
Cleaning Experts954-945-9556
Mold & Duct Cleaning Experts

Mold remediation across Florida.

Mold remediation addresses affected materials and the conditions around them. M&D carries out work within an agreed scope, with a practical explanation of the areas involved, how they will be accessed and what the completed work will document.

Discuss your projectSend an inquiry

A plan for the materials in front of us

The starting point is the affected room or assembly: a wall, ceiling, cabinet area or another part of the building. An existing assessment, the water history and accessible conditions help connect that area to the work required.

A useful remediation scope identifies the surfaces to be cleaned, materials proposed for removal, limits on access and the moisture issue that needs attention. Where concealed conditions become visible during the work, those findings can change the plan. The change belongs in the project record.

Exposed wall cavity with framing, piping and protective sheeting from M&D field work.
Inside the work area: framing, piping and protective sheeting from M&D's published field gallery. Explore the field photographs.

Cleaning, removal and moisture correction

Material condition matters. EPA guidance describes cleaning suitable hard surfaces and drying them, while mold-affected porous materials may require removal when they cannot be adequately cleaned. Painting over growth leaves the underlying cleanup unresolved.

Moisture correction is part of the wider project. A leaking pipe, roof problem or air-conditioning condition may require a separate repair trade. The remediation scope identifies the work being performed and any source repair or rebuilding that remains outside it.

  • Identify affected materials and the proposed cleaning or removal method.
  • Account for concealed areas and how additional findings will be handled.
  • Keep source repairs, remediation and rebuilding responsibilities clear.

Access and protection are part of the work

Working on affected material involves the surrounding room as well as the surface being addressed. Entry routes, nearby belongings, occupied spaces and the movement of equipment all belong in the plan.

Containment and protective measures depend on the extent and type of work. EPA's remediation guidance explains that the plan should limit the spread of material while it is disturbed and removed. Access and preparation matter when a project reaches beyond a finished surface.

A record of what was actually completed

M&D documents the work included in the agreed service. The record is most useful when it ties a task to a room or material and identifies what remains unresolved. Photographs help explain the work; the written scope supplies the boundaries.

Completion of remediation, completion of a source repair and independent verification are separate milestones. Keeping them distinct makes it easier for the owner and the next professional to understand the property's status.

  • Areas and materials addressed within the scope.
  • Relevant work photographs and any changes to the planned tasks.
  • Access limitations and remaining moisture or repair concerns.
  • Any separate post-remediation verification required for the project.

Keep assessment and independent verification separate

An assessment investigates the condition. Remediation performs the material work. Post-remediation verification evaluates the conditions afterward against the applicable criteria. Florida regulates the roles involved, including restrictions on assessment and remediation at the same property.

M&D establishes its role before accepting an assignment. We do not represent our own remediation as independently cleared by us. An existing assessor report or project protocol helps identify the work and the separate verification needed.

Talk with M&D about your project

Our offices are in Oakland Park and Cape Canaveral, and we serve properties throughout Florida, including South Florida and Brevard County. Share your city and the requested work so we can discuss the project scope, access and scheduling.

Call 954-945-9556 or email moldandductexperts@gmail.com with the property city, affected rooms and any existing assessment or photographs. Include access restrictions and the best number for a callback.

Connect the services

Connect the remediation to the right next step

A cleanup proposal should connect to the condition being addressed and the way the finished work will be evaluated. Keep those decisions visible before the work is authorized.

  • When the condition still needs investigation

    If the affected area or moisture history is still unclear, review what an inspection or assessment is intended to document. Existing findings can help define a remediation scope; the provider roles must be established before an assignment is accepted.

  • Plan a separate verification assignment

    Discuss the applicable completion criteria and who will evaluate them. The verification page explains the records and prior-provider information needed for that discussion. M&D does not present its own remediation as independently cleared by M&D.

For the project discussion: For a remediation inquiry, bring the property city, affected rooms, existing assessment or protocol, moisture-source information and access requirements.

Statewide service

For properties across Florida.

M&D serves South Florida, Brevard County and communities throughout the state. Share your property city, the concern and any existing records so we can discuss the assignment.

Find your city in our Florida service areas →

Sources and further reading

  1. M&D services, project photographs and service area
  2. EPA: Mold, moisture and material cleanup
  3. EPA: Planning and carrying out remediation
  4. Florida DBPR: Mold-related service roles
Before the work

Questions about
the service.

Does every mold-affected material have to be removed?

No. The material and its condition guide the decision. Some suitable surfaces can be cleaned and dried; porous or damaged materials may require removal. The project scope identifies which approach applies to the areas being addressed.

Does remediation include fixing the leak or rebuilding the room?

Those are separate tasks unless the agreement specifically includes them. The proposal should identify who handles the moisture source, affected material work and any rebuilding, so each part has a clear owner.

Can the property remain occupied during the work?

That depends on the affected areas, the work planned and the access and protective measures required. Occupancy arrangements belong in the project plan before materials are disturbed.

Who checks the work afterward?

The project's verification requirements determine the separate assessment or clearance assignment. If M&D performs remediation, we do not present our own work as independently cleared by us.

Start with your property

Let’s define the work your property needs.

Tell us the property city, the concern and any existing inspection or project records.

Call 954-945-9556Send a service inquiry
Call M&DSend an inquiry